What Is DK380C4.0-H8? | And How Does DK380C4.0-H8 Work?

In factories and workshops, running machines make using smooth and reliable controls necessary. Enter the DK380C440-H8 in hopes of achieving tight control over the speed of your motor, saving power, or protecting your system from damage – if you want your machines to run better and last longer, the DK380C4.0-H8 is the answer!

What Is DK380C4.0-H8?

The DK380C4.0-H8 is a device to control motors. The principal function of the controller is to vary the speed and/ or rotation of a machine. The DK380C4.0-H8 is able to connect to motors in industrial machines, including fans, pumps, or conveyors and vary the speed as needed. 

The control is used to conserve electricity and to prevent early wear on machines. The power also protects machines from overheating and excessive current draw.

Key Features of DK380C4.0-H8 (In Simple Words)

Here are the main specifications that make the DK380C4.0-H8 a solid performer:

Power Rating – 4.0 kW 

It can support motors up to 4kW. This allows for medium-sized machines in factory settings.

Operates Off Of 380V Three-Phase Power

This is the standard power feed in nearly every industry and guarantees a steady and continuous performance output.

Ability to Control the Speed of the Motor (0 to 600Hz)

You are able to set the motor for a very slow run and a high-speed run as per your work needs.

No Sensor Required 

It uses smarts to control the motor without additional sensors. This makes it easier to install and maintain.

Can Handle Extra Load (150% for 1 Minute) 

If your machine is suddenly asked to do extra work, it can handle this temporarily without shutting down. 

Built-In Safety 

It will stop functioning if there is too much current, voltage problems, or overheating. This keeps your machines safe. 

Has RS485 Remote Control Option 

You can plug it into a computer or control panel so you can control it remotely. This is especially useful in fully automated factories. 

Can Operate Under Most Ambient Conditions 

It can operate well in temperatures between -10°C to 40°C. This means you can use it in most factory settings. 

It can be used with many machines. 

It can be used with fans, mixers, conveyors, water pumps, and even CNC machines.

How Does DK380C4.0-H8 Work?

The DK380C4.0-H8 gets electrical energy, makes a change inside, and distributes that energy to the motor in a controlled manner. The machine will determine how fast or slow to operate the motor – based on the instantaneous needs of your machine.

When your machine is working hard, it produces maximum power. If it has to slow down, it uses less power. With this intelligent regulation, the machine saves energy and prevents it from burning out. You could even plug it into a computer and control everything from there.

Why Should You Use DK380C4.0-H8?

Here are the main benefits:

Energy Efficiency 

The inverter reduces power waste by modifying the speed motors run to suit demand. In effect there is less electricity wasted and thus a decrease in utility bills. 

Cost Savings 

Less energy wasted, less break down, less wear and tear = overall lower maintenance and repair costs in the long term.

Precision Motor Control

You may optimize how the motor operates: speed, torque, start/stop time. This results in smoother and more consistent operation of the machine.

Versatility

The DK380C4.0-H8 takes up very little room in control panels or other compact electrical enclosures. It’s perfect for workstations with tight dimensions!

Flexibility

It accommodates numerous motor types and applications. So, instead of having to have unique devices for each, you can have one device used in many systems, and it will still be accurate.

In-built Protections

The internal safety features monitor voltage, current and thermal. This can keep equipment running and avoid sudden failures, which increases the life of the equipment.

Conclusion

The DK380C4.0-H8 is an excellent choice for anyone who is operating machines in a factory or workshop. It provides speed control, machine protection, and energy saving. It is smart, easy and supports many machine types.

If you need a motor control device that will help you work reliably and safely, the DK380C4.0-H8 is worth considering.

Also Read : 10.0.0.1 Piso WiFi Login Guide & Activation Steps